The Bendi B40i5 is a 4-wheel, articulated, LP gas engine-powered narrow aisle forklift designed to maximize warehouse cube utilization while providing front-loader versatility. It offers a 4,000 lb (1,814 kg) capacity at a 24-inch (600 mm) load center and lift heights up to 360 inches (9.14 m).
Powered by a Tier III-certified 2.5L Kubota industrial LP gas engine, the B40i5 combines narrow-aisle maneuverability, high lifting capability and dual indoor/outdoor operating capability.
In Saudi Arabia, Abdullah Hashim Company Limited (AHCL) Auto & Equipment Division provides Bendi material handling equipment with dedicated sales, after-sales service and original manufacturer spare-parts support through its Saudi Arabia network.
The Bendi B40i5 is a heavy-capacity, multi-purpose articulated forklift developed for material-handling operations where narrow aisles, high lifting requirements and operational versatility are important.
The forklift provides a 4,000 lb (1,814 kg) capacity at a 24-inch (600 mm) load center, with lift heights available up to 360 inches (9.14 m). Its specified stacking aisle is 78 inches (1.98 m) with a 48-inch (1,219 mm) long load.
The B40i5 uses a Tier III-certified 2.5L Kubota industrial LP gas engine rated at 61.7 HP at 2,600 RPM. Its gear-driven valve train eliminates belts and chains, while CAN-Bus electronics integrate drive, lift and steering functions.
For maneuverability, the forklift incorporates a 42-inch (1,067 mm) wide floating articulated front axle and a 180° DuraSteer™ articulation/steering assembly. Heavy-duty dual rear-wheel hydraulic motors provide the drive system, while automatic hydrostatic braking and a foot-activated hydraulic parking brake provide braking functions.
The B40i5 is equipped with a high-visibility 3-stage or 4-stage mast, integral sideshifter and 36-inch high load backrest. Its dual indoor/outdoor capability allows it to be used for specified warehouse and paved-surface material-handling applications.
Abdullah Hashim Company Limited (AHCL) was established in 1940 and its Auto & Equipment Division provides industrial equipment, construction equipment, material handling and warehouse equipment solutions across Saudi Arabia.
AHCL is the exclusive dealer and distributor in Saudi Arabia for the brands and products it represents, including Bendi material-handling equipment. The AHCL network covers Jeddah, Riyadh, Dammam, Tabuk, Buraidah, Jubail, Madinah, Hail, Al Hassa, Jizan and Al Kharj.
For Bendi equipment, AHCL supports customers with a dedicated after-sales service team and spare-parts network, including access to original manufacturer spare parts.
| Specification | Bendi B40i5 |
|---|---|
| Capacity at 24″ load center | 4,000 lb / 1,814 kg |
| Power source | LP Gas |
| Engine | 2.5L Kubota Industrial Engine |
| Engine certification | Tier III |
| Engine rating | 61.7 HP at 2,600 RPM |
| Truck weight | 13,700 lb / 6,214 kg |
| Loaded travel speed | 8 mph / 13 km/h |
| Unloaded travel speed | 8 mph / 13 km/h |
| Loaded lift speed | 90 fpm / 27.4 mpm |
| Unloaded lift speed | 100 fpm / 30.5 mpm |
| Loaded lowering speed | 100 fpm / 30.5 mpm |
| Unloaded lowering speed | 90 fpm / 27.4 mpm |
| Mast tilt up to 293″ | 3° forward / 3° backward |
| Mast tilt 294″–360″ | 1° forward / 2° backward |
| Lost load center | 12″ / 30.5 cm |
| Wheelbase | 69″ / 175.25 cm |
| Rear overhang | 28″ / 71 cm |
| Overall length to fork face | 109″ / 277 cm |
| Underclearance | 10″ / 25 cm |
| Operator floor height | 31″ / 79 cm |
| Overhead guard height | 87″ / 221 cm |
| Overhead guard width | 40″ / 101.5 cm |
| Overall width | 49″ / 124.5 cm |
| Fork carriage width | 41″ / 104 cm |
| Fork length | 40″ / 101.5 cm |
| Out-to-out fork spread | 9.4–39.5″ / 24–100 cm |
| Intermediate step height | 19″ / 48 cm |
| Gradeability | 15% loaded / 15% unloaded |
The B40i5 is available with 3-stage and 4-stage mast configurations. The listed 3-stage configurations provide lift heights from 188 inches (4.78 m) to 360 inches (9.14 m), while the listed 4-stage configurations provide lift heights from 250 inches (6.35 m) to 312 inches (7.92 m).
| Mast Type | Lift Height | Lowered Height | Free Lift | Overall Height |
|---|---|---|---|---|
| 3-Stage | 188″ / 4.78 m | 83″ / 2.11 m | 47″ / 1.19 m | 224″ / 5.69 m |
| 3-Stage | 198″ / 5.03 m | 87″ / 2.21 m | 51″ / 1.30 m | 234″ / 5.94 m |
| 3-Stage | 216″ / 5.49 m | 95″ / 2.41 m | 59″ / 1.50 m | 252″ / 6.40 m |
| 3-Stage | 224″ / 5.69 m | 98″ / 2.49 m | 62″ / 1.57 m | 260″ / 6.60 m |
| 3-Stage | 240″ / 6.10 m | 106″ / 2.69 m | 70″ / 1.78 m | 276″ / 7.01 m |
| 3-Stage | 258″ / 6.55 m | 115″ / 2.92 m | 79″ / 2.01 m | 294″ / 7.47 m |
| 3-Stage | 272″ / 6.91 m | 121″ / 3.07 m | 85″ / 2.16 m | 308″ / 7.82 m |
| 3-Stage | 294″ / 7.47 m | 128″ / 3.25 m | 92″ / 2.34 m | 330″ / 8.38 m |
| 3-Stage | 312″ / 7.92 m | 132″ / 3.35 m | 96″ / 2.44 m | 348″ / 8.84 m |
| 3-Stage | 322″ / 8.18 m | 137″ / 3.48 m | 101″ / 2.57 m | 358″ / 9.09 m |
| 3-Stage | 360″ / 9.14 m | 156″ / 3.96 m | 120″ / 3.05 m | 396″ / 10.06 m |
| 4-Stage | 250″ / 6.35 m | 87″ / 2.21 m | 51″ / 1.30 m | 286″ / 7.26 m |
| 4-Stage | 258″ / 6.55 m | 89″ / 2.26 m | 53″ / 1.35 m | 294″ / 7.47 m |
| 4-Stage | 276″ / 7.01 m | 95″ / 2.41 m | 59″ / 1.50 m | 312″ / 7.92 m |
| 4-Stage | 294″ / 7.47 m | 101″ / 2.57 m | 65″ / 1.65 m | 330″ / 8.38 m |
| 4-Stage | 312″ / 7.92 m | 107″ / 2.72 m | 71″ / 1.80 m | 348″ / 8.84 m |
(Free lift and overall height are based on a 36-inch (914 mm) high load backrest.)
Optional Features
Narrow-Aisle Warehouse Operations
The B40i5 is designed for narrow-aisle material handling, with a listed 78-inch (1,981 mm) right-angle stacking aisle for a 48 × 40-inch load. The technical data also specifies a 72-inch (1,828 mm) minimum clear aisle for a 40 × 48-inch load.
High-Level Pallet Handling
With lift heights available up to 360 inches (9.14 m), the B40i5 can be configured for high-level storage and pallet-handling operations.
Indoor & Outdoor Material Handling
The B40i5 provides dual indoor/outdoor capability, making it suitable for material-handling requirements across specified indoor and paved outdoor environments.
Trailer & Container Loading
The high-visibility 3-stage and 4-stage mast configurations provide the lifting capability required for applications involving elevated load handling, including trailer and container operations.
Warehouse & Distribution Operations
The articulated configuration provides front-loader versatility while allowing the forklift to work within narrow warehouse aisles.
Ramp & Uneven-Floor Operations
The B40i5 combines hydrostatic braking and drive functions with a floating articulated front axle for material-handling operations involving ramps and uneven floors.
What is the Bendi B40i5?
The Bendi B40i5 is a 4-wheel, LP gas engine-powered, multi-purpose articulated forklift designed for narrow-aisle material handling.
What is the capacity of the Bendi B40i5?
The B40i5 has a 4,000 lb (1,814 kg) capacity at a 24-inch (600 mm) load center.
What engine does the B40i5 use?
It uses a Tier III-certified 2.5L Kubota industrial LP gas engine with a rated output of 61.7 HP at 2,600 RPM.
What is the maximum lift height?
The B40i5 has lift heights available up to 360 inches (9.14 m).
What aisle width does the B40i5 require?
The technical specifications list a 72-inch (1,828 mm) minimum clear aisle for a 40 × 48-inch load and 78 inches (1,981 mm) for a 48 × 40-inch load.
Does the B40i5 use a 3-stage or 4-stage mast?
Both configurations are available. The technical data provides multiple lift-height configurations for the 3-stage and 4-stage mast options.
Does the B40i5 have a sideshifter?
Yes. The B40i5 includes an integral 11.2-inch (285 mm) stroke sideshifter and a 36-inch (914 mm) high load backrest.
What steering system does the B40i5 use?
The B40i5 uses a 180° front-end DuraSteer™ articulation/steering assembly together with hydraulic power steering.
Can the B40i5 be used indoors and outdoors?
Yes. The B40i5 is specified with dual indoor/outdoor capability.
What optional equipment is available?
Options include non-standard fork lengths, LED lighting, fork positioner, auxiliary hydraulics, non-marking tires, backup alarm, fire extinguisher, fork-height indicator and a carriage-mounted camera with operator-compartment monitor.
Who supplies Bendi forklifts in Saudi Arabia?
AHCL Auto & Equipment Division is the exclusive dealer and distributor in Saudi Arabia for the Bendi products it represents, supported by its Saudi Arabia sales, service and spare-parts network.
Does AHCL provide after-sales support for Bendi forklifts?
Yes. AHCL provides after-sales support through its service network and supports customers with original manufacturer spare parts and service capabilities across its Saudi Arabia branch network.
