The Bendi B30AC and B40AC are four-wheel, articulating, AC-powered narrow aisle electric forklifts designed to maximize warehouse space utilization while providing front-loader versatility.
With capacities of 3,000 lb (1,361 kg) and 4,000 lb (1,814 kg) respectively at a 24-inch (600 mm) load center, the B30AC and B40AC combine narrow-aisle operation, lifting capability, maneuverability, and operator-focused features.
Abdullah Hashim Company Limited (AHCL) – Auto & Equipment Division is the exclusive dealer and distributor of Bendi products in Saudi Arabia. With AHCL’s established presence in the Kingdom, customers can access Bendi material handling equipment along with technical support, after-sales service, and original manufacturer spare parts through AHCL’s network across Saudi Arabia.
The Bendi B30AC / B40AC is a narrow aisle electric forklift designed for operations where efficient use of warehouse space is important. The four-wheel articulating design enables the forklift to operate in aisles as narrow as 78 inches (1.98 m) with a 48-inch (1,200 mm) long load, while maintaining front-loader versatility.
The B30AC has a rated capacity of 3,000 lb (1,361 kg) and the B40AC has a rated capacity of 4,000 lb (1,814 kg), both at a 24-inch (600 mm) load center. Both models are available with high-visibility 3-stage or 4-stage masts, with lift heights available up to 312 inches (7.92 m) for the B30AC and 374 inches (9.50 m) for the B40AC in the specified configurations.
The forklift incorporates DuraSteer™ front-end articulation/steering, dual rear-wheel planetary drives, AC traction and hydraulic controls, and large-diameter smooth rubber drive tires with polyurethane smooth load tires. These features are designed around maneuverability, traction, control, and narrow-aisle material handling.
The B30AC and B40AC can operate in standard warehouse operations, as well as inside and outside on paved surfaces. Their configuration allows them to perform the same types of jobs as reach and counterbalanced trucks while operating in narrower aisles. They can also be used for loading and unloading trailers and containers.
Abdullah Hashim Company Limited (AHCL) has been providing equipment and solutions in Saudi Arabia since 1940. Through its Auto & Equipment Division, AHCL represents leading international equipment brands and provides solutions across material handling, warehouse equipment, construction, and industrial applications.
As the exclusive dealer and distributor of Bendi products in Saudi Arabia, AHCL supports customers with product selection, technical assistance, after-sales service, and original manufacturer spare parts.
AHCL’s Auto & Equipment Division network covers Jeddah, Riyadh, Dammam, Tabuk, Buraidah, Jubail, Madinah, Hail, Al Hassa, Jizan, and Al Kharj, providing customers across the Kingdom with access to equipment support and services.
| Specification | B30AC | B40AC |
|---|---|---|
| Capacity at 24″ / 600 mm Load Center | 3,000 lb / 1,361 kg | 4,000 lb / 1,814 kg |
| Weight with Battery | 12,800 lb / 5,818 kg | 13,770 lb / 6,259 kg |
| Travel Speed – Loaded | 6.5 mph / 10.5 km/h | 6.5 mph / 10.5 km/h |
| Travel Speed – Unloaded | 7 mph / 11.3 km/h | 7 mph / 11.3 km/h |
| Lift Speed – Loaded | 90 fpm / 27.4 mpm | 90 fpm / 27.4 mpm |
| Lift Speed – Unloaded | 110 fpm / 33.5 mpm | 110 fpm / 33.5 mpm |
| Lowering Speed – Loaded | 100 fpm / 30.4 mpm | 100 fpm / 30.4 mpm |
| Lowering Speed – Unloaded | 90 fpm / 27.4 mpm | 90 fpm / 27.4 mpm |
| Wheelbase | 63″ / 160 cm | 63″ / 160 cm |
| Overall Width | 43″ / 109 cm | 48″ / 122 cm |
| Fork Length | 40″ / 102 cm | 40″ / 102 cm |
| Right Angle Stacking Aisle | 78″ / 198 cm | 78″ / 198 cm |
| Intersecting Aisle | 108″ / 274 cm | 108″ / 274 cm |
| Gradeability | 15% | 15% |
| Hydraulic Motor Rating | 12 kW | 12 kW |
| Traction Motor Rating | 5.1 kW each / 10.2 kW total | 5.6 kW each / 11.2 kW total |
| Traction Control | AC | AC |
| Hydraulic Control | AC | AC |
| Front Wheel Size | 14 × 5″ / 35.6 × 12.7 cm | 14 × 5″ / 35.6 × 12.7 cm |
| Rear Wheel Size | 18 × 7″ / 45.7 × 17.8 cm | 18 × 7″ / 45.7 × 17.8 cm |
Mast & Lift Heights
Both models are available with 3-stage and 4-stage mast configurations.
B30AC
B40AC
The specified mast configurations include free-lift and overall-height dimensions that vary according to the selected lift height.
4-Wheel Articulating Design
The B30AC and B40AC use a four-wheel articulating configuration designed for narrow aisle operation and front-loader versatility.
Narrow Aisle Operation
The forklifts can operate in a 78-inch (1.98 m) stacking aisle with a 48-inch (1,200 mm) long load.
DuraSteer™ Front-End Steering
The 180° front-end DuraSteer™ articulation/steering assembly provides the steering configuration used by the B30AC and B40AC. The specification sheet identifies a 5-year warranty for the DuraSteer™ assembly.
AC Drive and Hydraulic Systems
The B30AC and B40AC use AC traction and hydraulic controls, with powerful AC drive and hydraulic motors.
High-Visibility Mast
The forklifts are equipped with a high-visibility 3-stage or 4-stage mast, depending on configuration.
Integral Side Shifter
An integral 11.2-inch (285 mm) stroke side shifter and 36-inch (914 mm) high load backrest are included as standard features.
Operator-Focused Design
Standard equipment includes a suspension seat, adjustable steering column, armrest, seat belt, hydraulic power steering, and controls positioned for easy operator access.
Diagnostic Display
The forklift features a full diagnostic intelligent display with battery discharge indicator and hour meter.
Maintenance Accessibility
Components are designed to be easily accessible to support low-cost maintenance.
Available Options
Depending on configuration, available options include:
The Bendi B30AC and B40AC are designed for applications where narrow aisle operation, space utilization, lifting, loading, and material handling versatility are required.
Warehouse Operations
The B30AC and B40AC are designed for standard warehouse operations and can operate in narrow aisles to maximize available storage space.
Narrow Aisle Material Handling
Their 78-inch (1.98 m) stacking aisle capability with a specified 48-inch × 40-inch load configuration makes them suitable for narrow aisle material handling.
Loading & Unloading
The three- and four-stage mast configurations make the forklifts suitable for loading and unloading trailers and containers.
Indoor & Paved Outdoor Operations
The B30AC and B40AC can operate inside and outside on paved surfaces, according to the product specifications.
High-Density Storage
The narrow aisle configuration is designed to maximize cube utilization and warehouse space while maintaining forklift functionality.
What are the Bendi B30AC and B40AC forklifts?
The Bendi B30AC and B40AC are four-wheel, articulating, AC-powered narrow aisle electric forklifts designed for space-efficient material handling and front-loader versatility.
What is the lifting capacity of the B30AC and B40AC?
The B30AC has a capacity of 3,000 lb (1,361 kg) and the B40AC has a capacity of 4,000 lb (1,814 kg), both at a 24-inch (600 mm) load center.
How narrow an aisle can the B30AC and B40AC operate in?
The B30AC and B40AC can operate in a 78-inch (1.98 m) stacking aisle with a 48-inch (1,200 mm) long load. The specified intersecting aisle is 108 inches (2.743 m).
What is the maximum lift height of the B30AC?
The B30AC is available with 3-stage and 4-stage mast configurations. The specified 4-stage configuration provides lift heights up to 312 inches (7.92 m).
What is the maximum lift height of the B40AC?
The B40AC is available with 3-stage and 4-stage mast configurations. The specified 4-stage configuration provides lift heights up to 374 inches (9.50 m).
Are the B30AC and B40AC electric forklifts?
Yes. The B30AC and B40AC are AC-powered electric forklifts with AC traction and hydraulic control systems and a 48-volt electrical system.
What type of steering system does the Bendi B30AC/B40AC use?
The forklifts use the DuraSteer™ front-end articulation/steering assembly, with 180° front-end articulation.
Can the B30AC and B40AC be used indoors and outdoors?
Yes. The product information states that the forklifts can work inside and outside on paved surfaces.
What industries or applications are the Bendi B30AC and B40AC designed for?
The provided product information specifically identifies standard warehouse operations, narrow aisle material handling, loading and unloading trailers and containers, and indoor/outdoor operation on paved surfaces.
Who is the Bendi dealer and distributor in Saudi Arabia?
Abdullah Hashim Company Limited (AHCL) – Auto & Equipment Division is the exclusive dealer and distributor of Bendi products in Saudi Arabia. AHCL provides product support, after-sales service, and original manufacturer spare parts through its Saudi Arabia network.
Does AHCL provide after-sales service and spare parts for Bendi forklifts?
Yes. AHCL Auto & Equipment Division provides after-sales service, technical support, and original manufacturer spare parts for the brands and products represented by the division.
Where can I get Bendi B30AC or B40AC forklifts in Saudi Arabia?
Customers can contact AHCL Auto & Equipment Division for Bendi B30AC and B40AC availability, equipment support, after-sales service, and original manufacturer spare parts. AHCL’s network covers Jeddah, Riyadh, Dammam, Tabuk, Buraidah, Jubail, Madinah, Hail, Al Hassa, Jizan, and Al Kharj.
